It is widely used in aviation, shipping, transportation industry, machining, energy industry mould, agricultural machinery, construction machinery, motor and electrical.
- Rapid feed rate (X / Y / Z axis)：36000/36000/36000mm/min
- Three axis travel (X / Y / Z axis)：1100/600/620mm
- Inheriting the rigid structure of Deyung and matching with the mihanna casting body to provide stable machining rigidity.
- The front end of the spindle is equipped with annular water spray to effectively cool the cutting tools. At the same time, the internal air curtain negative pressure design prolongs the service life and ensures the reliable operation of the spindle at high speed for a long time.
- The three-axis is equipped with automatic lubrication system to facilitate maintenance and ensure the service life of the machine tool for a long time. Clean the air filter system and maintain the cleanliness of air.
- Scraping and grinding is a finishing process that uses scraper, reference surface, measuring tools and display agent to measure and scrape and grind the workpiece while grinding points in the way of manual operation, so as to make the workpiece meet the requirements of size, geometry, surface roughness and tightness specified in the process.
规格参数表
| Item | Unit | HD-1166 |
| Travel | ||
| X axis travel | mm | 1100 |
| Y axis travel | mm | 600 |
| Z axis travel | mm | 620 |
| Distance from spindle end face to worktable Center | mm | 175-795 |
| Spindle center to table top | mm | 50-650 |
| Distance from ground to table surface | mm | 1175.5 |
| Maximum workpiece rotation diameter | mm | 1200 |
| Worktable | ||
| Table size(X*Z) | mm | 500x500 |
| T slot size (Number of slots x Wide x Gap) | mm | 5-18x100 |
| Table Load | kg | 750 |
| Center locating hole | mm | Φ100H7 |
| Indexing accuracy | arc.sec | 25 |
| Positioning accuracy | arc.sec | 15 |
| Brake pressure (oil pressure) | Mpa | 4.5±0.5 |
| Braking torque | N.m | 2650 |
| Maximum speed | rpm | 40 |
| Minimum angle unit | deg(°) | 0.001 |
| Spindle | ||
| Spindle motor（continuous / 30 minutes） | kW | 7.5/11 |
| Spindle Speed | rpm | 10-12000 |
| Spindle taper | ISO | N.T.NO.40 |
| Three axis | ||
| (X / Y / Z axis) Motor | kW | 3/3/3 |
| Feed rate | ||
| Rapid feed rate（X/Y/Z) | mm/min | 36000/36000/36000 |
| Fastest cutting speed | mm/min | 1-10000 |
| Tool change system (optional) | ||
| Magazine capacity (standard / optional) | set | 24/32 |
| Magazine form | 刀臂式 | |
| Pull star | # | MAS-P40-1(45°) |
| Maximum tool diameter of adjacent tools | mm | Φ80 |
| Maximum tool diameter of empty adjacent tool | mm | Φ150 |
| Max. Tool length | mm | 300 |
| Max. Tool weight | kg | 8 |
| Machine tool accuracy | ||
| Three axis positioning accuracy (JIS6338 measurement method) | ||
| Positioning accuracy (Full travel) | mm | ±0.010 |
| Repeat positioning accuracy (Full travel) | mm | ±0.006 |
| System | ||
| Controller | FANUC OI-MF | |
| Air pressure demand | kg/cm² | 6 |
| Power | ||
| Power specification | AC380±10%,3相，60Hz/50Hz | |
| Power demand | kVA | 30 |
| Other | ||
| Machine height (maximum) | mm | 2674 |
| Machine weight | T | 6.8 |
Create greater value for you and enhance product competitiveness
Contact Us